2013互動技術概論: HW11

顯示具有 HW11 標籤的文章。顯示所有文章

2013年12月15日星期日

Week11魏正

改寫File-Examples-Basic-Blink
1.
int led = 13;
void setup() {
pinMode(led, OUTPUT);
}
void loop() {
digitalWrite(led, HIGH);
delay(1000);
digitalWrite(led, LOW);
delay(1000);
}

2.
int led = 13;
void setup() {
pinMode(led, OUTPUT);
}
void loop() {
digitalWrite(led, HIGH);
digitalWrite(10, HIGH);
delay(500);
digitalWrite(led, LOW);
digitalWrite(10, LOW);
delay(500);
for(int i=0;i<3;i++)
{
digitalWrite(led, HIGH);
delay(200);
digitalWrite(10, HIGH);
delay(200);
digitalWrite(led, LOW);
delay(200);
digitalWrite(10, LOW);
delay(200);
}
}

2013年12月1日星期日

Week11

W11 課堂練習

int leg;

int now;

void setup() { leg=10;

pinMode(10,OUTPUT);

pinMode(11,OUTPUT);

pinMode(12,OUTPUT);

pinMode(13,OUTPUT);

}

void loop() {

digitalWrite(now,HIGH);

delay(200);

digitalWrite(now,LOW);

delay(100);

call();

}

void call() { now=leg+(int)random(0,4); }

影片!

2013年11月25日星期一

第十一週上課

第一次的arduino實作課程附上程式碼 int leg; int now; void setup() { leg=10;//接腳的pin now=13;//通電的腳位 /*以下是輸出的腳位宣告*/ pinMode(10,OUTPUT); pinMode(11,OUTPUT); pinMode(12,OUTPUT); pinMode(13,OUTPUT); } void loop() { /*數位訊號發出*/ digitalWrite(now,HIGH); delay(200);//亮的時間 digitalWrite(now,LOW); delay(100);//熄的時間 /*呼叫切換函式*/ call(); } /*call 切換輸出腳位*/ void call() { //隨機決定輸出腳位 now=leg+(int)random(0,4); }

2013年11月24日星期日

Week11 作業

2013年11月17日星期日

Week11

##實作1-範例Blink
一個LED燈閃爍,有修改秒數

/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.

This example code is in the public domain.
*/

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;

// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
}

// the loop routine runs over and over again forever:
void loop() {
digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}

====程式碼====

##實作2-Blink
三個LED燈閃爍

====程式碼====
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.

This example code is in the public domain.
*/

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
//

// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(13, OUTPUT);
pinMode(12, OUTPUT);
pinMode(11, OUTPUT);
}

// the loop routine runs over and over again forever:
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(100); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(100); // wait for a second
digitalWrite(12, HIGH); // turn the LED on (HIGH is the voltage level)
delay(100); // wait for a second
digitalWrite(12, LOW); // turn the LED off by making the voltage LOW
delay(100);
digitalWrite(11, HIGH); // turn the LED on (HIGH is the voltage level)
delay(100); // wait for a second
digitalWrite(11, LOW); // turn the LED off by making the voltage LOW
delay(100); // wait for a second
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(100); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(100);
digitalWrite(12, HIGH); // turn the LED on (HIGH is the voltage level)
delay(100); // wait for a second
digitalWrite(12, LOW); // turn the LED off by making the voltage LOW
delay(100); // wait for a second
digitalWrite(11, HIGH); // turn the LED on (HIGH is the voltage level)
delay(100); // wait for a second
digitalWrite(11, LOW); // turn the LED off by making the voltage LOW
delay(100);

}

week11

0. 發 Arduino Starter Kit、Arduino Mega2560、Arduino Project Book, 每個人手上都有一個板子

1. 練習第一個範例 File-Examples-Basic-Blink

2. 修改程式,變成展得比較特別的作法

week11 課堂作業

第十一周上課內容

1. 練習第一個範例 File-Examples-Basic-Blink

2. 修改程式,變成展得比較特別的作法

void setup(){
pinMode(11, OUTPUT);
pinMode(13, OUTPUT); //13號孔的燈
pinMode(12, OUTPUT); //12號孔的燈
}
void loop(){
digitalWrite(13, HIGH);
delay(100);
digitalWrite(13, LOW);
delay(200);

digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(200);

digitalWrite(11, HIGH);
delay(100);
digitalWrite(11, LOW);
delay(200);

}

Week 11 上課作業

程式碼:
void setup() { // put your setup code here, to run once: pinMode(13, OUTPUT); pinMode(12, OUTPUT); pinMode(11, OUTPUT); } void loop() { digitalWrite(13, HIGH); delay(200); digitalWrite(13, LOW); delay(200); digitalWrite(12, HIGH); delay(200); digitalWrite(12, LOW); delay(200); digitalWrite(11, HIGH); delay(200); digitalWrite(11, LOW); delay(200); digitalWrite(13, HIGH); delay(200); digitalWrite(12, HIGH); delay(200); digitalWrite(11, HIGH); delay(200); digitalWrite(13, LOW); delay(200); digitalWrite(12,LOW); delay(200); digitalWrite(11, LOW); delay(200); digitalWrite(13, HIGH); delay(200); digitalWrite(12, HIGH); delay(200); digitalWrite(11, HIGH); delay(200); digitalWrite(11, LOW); delay(200); digitalWrite(12,LOW); delay(200); digitalWrite(13, LOW); delay(200); }

第十一週上課內容

1. 練習第一個範例 File-Examples-Basic-Blink

影片

2. 修改程式,變成展得比較特別的作法

一顆燈泡閃爍

影片 coming soon

三顆燈泡閃爍

影片 coming soon

Week11 張智棠

本周進度:

1 . 拿到Arduino的各設備

2. 測試版子

3. 試利用板子實作如下

99163116鄭祥斌, Week11, HW11

1.插入Arduino(硬體)，看COMPort
2.跑Arduino軟體(啟動-Arduino)
FILE-Example-Basic-Blink
3.範例Blink
改 delay(1000) 慢閃
delay(200) 快閃
4.上傳前，Tool-Port要改一下

程式碼:
void setup(){
pinMode(13,OUTPUT);
}
void loop(){
digitalWrite(13,HIGH);
delay(1000);
digitalWrite(13,LOW);
delay(200);

digitalWrite(13,HIGH);
delay(100);
digitalWrite(13,LOW);
delay(800);

digitalWrite(13,HIGH);
delay(1000);
digitalWrite(13,LOW);
delay(200);

digitalWrite(13,HIGH);
delay(100);
digitalWrite(13,LOW);
delay(100);

digitalWrite(13,HIGH);
delay(100);
digitalWrite(13,LOW);
delay(500);

digitalWrite(13,HIGH);
delay(1000);
digitalWrite(13,LOW);
delay(200);
}

LED接法:長(正極)接13，短(負極)接GND

void setup(){
pinMode(13,OUTPUT);
pinMode(12,OUTPUT);
pinMode(11,OUTPUT);
pinMode(8,OUTPUT);
}
void loop(){
digitalWrite(13,HIGH);
delay(200);
digitalWrite(12,HIGH);
delay(200);
digitalWrite(11,HIGH);
delay(1000);

digitalWrite(13,LOW);
delay(200);
digitalWrite(12,LOW);
delay(200);
digitalWrite(11,LOW);
delay(1000);

digitalWrite(13,HIGH);
delay(1000);
digitalWrite(12,HIGH);
delay(600);
digitalWrite(11,HIGH);
delay(200);

digitalWrite(13,LOW);
delay(1000);
digitalWrite(12,LOW);
delay(600);
digitalWrite(11,LOW);
delay(200);

digitalWrite(13,HIGH);
delay(1000);
digitalWrite(12,HIGH);
delay(100);
digitalWrite(11,HIGH);
delay(500);

digitalWrite(13,LOW);
delay(500);
digitalWrite(12,LOW);
delay(100);
digitalWrite(11,LOW);
delay(1000);

digitalWrite(8,HIGH);
delay(100);
digitalWrite(8,LOW);
delay(200);
digitalWrite(8,HIGH);
delay(100);
digitalWrite(8,LOW);
delay(200);
}

void setup(){
pinMode(13,OUTPUT);
pinMode(12,OUTPUT);
pinMode(11,OUTPUT);
pinMode(8,OUTPUT);
}
void loop(){
digitalWrite(13,HIGH);
delay(200);
digitalWrite(13,LOW);
delay(200);
digitalWrite(12,HIGH);
delay(200);
digitalWrite(12,LOW);
delay(200);
digitalWrite(11,HIGH);
delay(200);
digitalWrite(11,LOW);
delay(200);
digitalWrite(8,HIGH);
delay(200);
digitalWrite(8,LOW);
delay(200);
digitalWrite(11,HIGH);
delay(200);
digitalWrite(11,LOW);
delay(200);
digitalWrite(12,HIGH);
delay(200);
digitalWrite(12,LOW);
delay(200);
digitalWrite(13,HIGH);
delay(200);
digitalWrite(13,LOW);
delay(200);

digitalWrite(13,HIGH);
delay(1000);
digitalWrite(12,HIGH);
delay(1000);
digitalWrite(11,HIGH);
delay(1000);
digitalWrite(8,HIGH);
delay(1000);

digitalWrite(13,LOW);
delay(200);
digitalWrite(12,LOW);
delay(200);
digitalWrite(11,LOW);
delay(200);
digitalWrite(8,LOW);
delay(200);
}

week11 鄭羽婷

第一個 Arduino 作品
概念，紅綠燈
綠燈->閃黃燈(連續閃)->紅燈

void setup() {
pinMode(11, OUTPUT);
pinMode(12, OUTPUT);
pinMode(13, OUTPUT);
}

void loop() {
digitalWrite(13, HIGH);
delay(2000);
digitalWrite(13, LOW);

digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(100);
digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(100);
digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(100);
digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);

digitalWrite(11, HIGH);
delay(1000);
digitalWrite(11, LOW);
delay(200);
}

第 11 週

void setup() 
{                
  pinMode(13, OUTPUT);   
  pinMode(12, OUTPUT); 
  pinMode(10, OUTPUT); 
 
}
void loop() {
  digitalWrite(13, HIGH); 
  delay(20);               
  digitalWrite(13, LOW);    
  delay(20);  
  
  digitalWrite(12, HIGH); 
  delay(1000);               
  digitalWrite(12, LOW);    
  delay(200); 
  
  digitalWrite(10, HIGH); 
  delay(2000);               
  digitalWrite(10, LOW);    
  delay(200);

}

week11 上課內容

主題：DoReMei
https://www.youtube.com/watch?v=iqOKMutD4AQ

WEEK11,課堂作業

第一、二節課教學如何使用Arudino的工具

(1)插入Arudino硬體，

(2)跑Arudino軟體

File-Example

Basic-Blink

(3)範例Blink

改delay(1000)慢閃

delay(200)快閃

自己打的程式碼

void setup(){

pinMode(13,OUTPUT);

}

void loop(){

digitalWrite(13, HIGH);

delay(200);

digitalWrite(13, LOW);

delay(500);

digitalWrite(13, HIGH);

delay(1000);

digitalWrite(13, LOW);

delay(500);

}

實作的Arudino硬體

第三節程式碼

void setup(){

pinMode(13,OUTPUT);

pinMode(12,OUTPUT);

pinMode(11,OUTPUT);

}

void loop(){

digitalWrite(13, HIGH);

delay(200);

digitalWrite(12, HIGH);

delay(400);

digitalWrite(11, HIGH);

delay(600);

digitalWrite(13, LOW);

delay(200);

digitalWrite(12, LOW);

delay(400);

digitalWrite(11, LOW);

delay(600);

修改程式,變成展得比較特別的作法

Week11 陳奕汎

\WEEK11 廖中遠閃閃燈Arduno Blink

void setup(){
pinMode(13,OUTPUT);
pinMode(12,OUTPUT);
pinMode(11,OUTPUT);
pinMode(10,OUTPUT);
}
void loop(){
digitalWrite(13,HIGH);
delay(500);
digitalWrite(13,LOW);
delay(500);
digitalWrite(12,HIGH);
delay(1000);
digitalWrite(12,LOW);
delay(1000);
digitalWrite(11,HIGH);
delay(200);
digitalWrite(11,LOW);
delay(200);
digitalWrite(10,HIGH);
delay(50);
digitalWrite(10,LOW);
delay(50);
}

week11

1. 練習第一個範例 File-Examples-Basic-Blink
有規律的亮燈

void setup() {
pinMode(11, OUTPUT);
pinMode(12, OUTPUT);
pinMode(13, OUTPUT);
}

void loop() {
digitalWrite(13, HIGH);
delay(2000);
digitalWrite(13, LOW);

digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(100);
digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(100);
digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);
delay(100);
digitalWrite(12, HIGH);
delay(200);
digitalWrite(12, LOW);

digitalWrite(11, HIGH);
delay(1000);
digitalWrite(11, LOW);
delay(200);
}

訂閱：文章 (Atom)

2013年12月15日 星期日

2013年12月1日 星期日

2013年11月25日 星期一

2013年11月24日 星期日

2013年11月17日 星期日

1. 練習第一個範例 File-Examples-Basic-Blink

2. 修改程式,變成展得比較特別的作法

2013年12月15日星期日

2013年12月1日星期日

2013年11月25日星期一

2013年11月24日星期日

2013年11月17日星期日