2013互動技術概論: 99160540張本賢

顯示具有 99160540張本賢 標籤的文章。顯示所有文章

2014年1月12日星期日

week19

期末作品
void setup(){
pinMode(3,INPUT);
pinMode(10,OUTPUT);
pinMode(7,OUTPUT);
}
void loop(){
byte gb = digitalRead(3);
if(gb == 0){
digitalWrite(7,HIGH);
digitalWrite(10,LOW);
tone(8,0);
}else{
digitalWrite(7,LOW);
digitalWrite(10,HIGH);
tone(8,200);
//tone(8,2000);
}
}

2013年12月8日星期日

week14

我們要做電流急急棒

碰到會燈泡會亮

另外碰到的同時也會發出聲音

範例影片一

範例影片二

2013年12月1日星期日

week13

int sensorValue; int sensorLow = 1023; int sensorHigh = 0; const int ledPin = 13; void setup(){ pinMode(ledPin, OUTPUT); digitalWrite(ledPin, HIGH); while(millis() < 5000){ sensorValue = analogRead(A0); if(sensorValue > sensorHigh){ sensorHigh = sensorValue; } if(sensorValue < sensorLow){ sensorValue = sensorLow; } } digitalWrite(ledPin, LOW); } void loop(){ sensorValue = analogRead(A0); int pitch = map(sensorValue,sensorLow,sensorHigh, 50, 4000); tone(8,pitch,20); delay(10); }

========================================================================

int notes[] = {262,294,330,349}; void setup(){ Serial.begin(9600); } void loop(){ int keyVal = analogRead(A0); Serial.println(keyVal); if(keyVal == 1023){ tone(8, notes[0]); } else if(keyVal >= 990 && keyVal <= 1010){ tone(8, notes[1]); } else if(keyVal >= 505 && keyVal <= 515){ tone(8, notes[2]); } else if(keyVal >= 5 && keyVal <= 10){ tone(8, notes[3]); } else{ noTone(8); } }

=================================================================

2013年11月24日星期日

week12

第1節課

Project 03 Love-O-Meter 溫度測試亮燈

隨著溫度的上升，讓燈泡亮起來

============================================================

const int sensorPin = A0;
const float baselineTemp = 20.2;
void setup(){
  Serial. begin(9600);
  for(int pinNumber = 2; pinNumber<5; pinNumber++){
    pinMode(pinNumber, OUTPUT);
    digitalWrite(pinNumber, LOW);
  }
}

void loop(){
  int sensorVal = analogRead(sensorPin);
  Serial.print("Sensor Value: ");
  Serial.print(sensorVal);
  float voltage = (sensorVal/1024.0) * 5.0;
  Serial.print(", Volts:");
  Serial.print(voltage);
  Serial.print(", degrees C:");
  float temperature = (voltage - .5)*100;
  Serial.println(temperature);
  if(temperature < baselineTemp){
    digitalWrite(2, LOW);
    digitalWrite(3, LOW);
    digitalWrite(4, LOW);
    }else if(temperature >= baselineTemp+2 && temperature < baselineTemp+4){
    digitalWrite(2, HIGH);
    digitalWrite(3, LOW);
    digitalWrite(4, LOW);
    }else if(temperature >= baselineTemp+4 && temperature < baselineTemp+6){
    digitalWrite(2, HIGH);
    digitalWrite(3, HIGH);
    digitalWrite(4, LOW);
    }else if(temperature >= baselineTemp+6 ){
    digitalWrite(2, HIGH);
    digitalWrite(3, HIGH);
    digitalWrite(4, HIGH);
    }
    delay(1);
}

第2節課

Project 04 Color Mixing Lamp 改變顏色
利用光敏電阻，當手壓著光敏電阻，讓LED燈該顏色不會亮。
我們的光敏電阻順序為:紅色、綠色、藍色

==========================================================================

const int greenLEDPin = 9; const int redLEDPin = 11; const int blueLEDPin = 10; const int redSensorPin = A0; const int greenSensorPin = A1; const int blueSensorPin = A2; int redValue = 0; int greenValue = 0; int blueValue = 0; int redSensorValue = 0; int greenSensorValue =0; int blueSensorValue =0; void setup(){ Serial.begin(9600); pinMode(greenLEDPin,OUTPUT); pinMode(redLEDPin,OUTPUT); pinMode(blueLEDPin,OUTPUT); } void loop(){ redSensorValue = analogRead(redSensorPin); delay(5); greenSensorValue = analogRead(greenSensorPin); delay(5); blueSensorValue = analogRead(blueSensorPin); Serial.print("Raw Sensor Values \t Red: "); Serial.print(redSensorValue); Serial.print("\t Green: "); Serial.print(greenSensorValue); Serial.print("\t Blue: "); Serial.print(blueSensorValue); redValue = redSensorValue/4; greenValue = greenSensorValue/4; blueValue = blueSensorValue/4; Serial.print("Mapped Sensor Values \t Red: "); Serial.print(redValue); Serial.print("\t green: "); Serial.print(greenValue); Serial.print("\t Blue: " ); Serial.print(blueValue); analogWrite(redLEDPin, redValue); analogWrite(greenLEDPin, greenValue); analogWrite(blueLEDPin, blueValue); }

2013年11月18日星期一

week10

期中作品
PImage map,map1,map2,gg,win;
int page=1;
int stage;

void setup(){

size(600,500);
map = loadImage("ggbun.png");
map1 = loadImage("ggbun1.png");
map2 = loadImage("ggbun2.png");
gg = loadImage("gg.jpg");
win = loadImage("win.png");
loadPixels();
}

void draw(){
println(""+pixels[mouseX+mouseY*600]);
fill(pixels[mouseX+mouseY*600]);
if(pixels[mouseX+mouseY*600]==-16777216)
page=0;
if(pixels[mouseX+mouseY*600]==-14503604)
page=2;

if(pixels[mouseX+mouseY*600]==-16735512)
page=3;

if(pixels[mouseX+mouseY*600]==-1237980)
page=4;
if (page==0)
image(gg,0,0);
if (page==1)
image(map,0,0);
if (page==2)
image(map1,0,0);
if (page==3)
image(map2,0,0);
if (page==4)
image(win,0,0);
loadPixels();

}

2013年11月17日星期日

week11

int led = 13;
void setup() {

pinMode(led, OUTPUT); //輸出地13支
}
void loop() {

digitalWrite(led, HIGH); //第13支亮
delay(400); //延遲0.4秒

digitalWrite(led, LOW); /第13支暗
delay(400); //延遲0.4秒

}

3個燈
int led = 13,x=100;
void setup() {

pinMode(13, OUTPUT);
pinMode(12, OUTPUT);
pinMode(11, OUTPUT);
}
void loop() {
digitalWrite(11, HIGH);
delay(400);
digitalWrite(11, LOW);
digitalWrite(12, HIGH);
delay(400);
digitalWrite(12, LOW);
digitalWrite(13, HIGH);
delay(400);
digitalWrite(13, LOW);
delay(500);
digitalWrite(13, HIGH);
delay(400);
digitalWrite(12, HIGH);
delay(400);
digitalWrite(11, HIGH);
delay(1000);
digitalWrite(11, LOW);
delay(400);
digitalWrite(12, LOW);
delay(400);
digitalWrite(13, LOW);
delay(400);
digitalWrite(13, HIGH);
digitalWrite(12, HIGH);
digitalWrite(11, HIGH);
delay(400);
digitalWrite(13, LOW);
digitalWrite(12, LOW);
digitalWrite(11, LOW);
delay(400);
digitalWrite(13, HIGH);
digitalWrite(12, HIGH);
digitalWrite(11, HIGH);
delay(400);
digitalWrite(13, LOW);
digitalWrite(12, LOW);
digitalWrite(11, LOW);
delay(1000);

}