Week11

##實作1-範例Blink
一個LED燈閃爍,有修改秒數

/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.

  This example code is in the public domain.
 */

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;

// the setup routine runs once when you press reset:
void setup() {              
  // initialize the digital pin as an output.
  pinMode(led, OUTPUT);  
}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);               // wait for a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);               // wait for a second
}

====程式碼====

##實作2-Blink
三個LED燈閃爍

====程式碼====
/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.

  This example code is in the public domain.
 */

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
//

// the setup routine runs once when you press reset:
void setup() {              
  // initialize the digital pin as an output.
  pinMode(13, OUTPUT);  
    pinMode(12, OUTPUT);  
      pinMode(11, OUTPUT);  
}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
  delay(100);           // wait for a second
  digitalWrite(12, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(12, LOW);    // turn the LED off by making the voltage LOW
  delay(100);
    digitalWrite(11, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(11, LOW);    // turn the LED off by making the voltage LOW
  delay(100);           // wait for a second
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
  delay(100);
  digitalWrite(12, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(12, LOW);    // turn the LED off by making the voltage LOW
  delay(100);           // wait for a second
  digitalWrite(11, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(100);               // wait for a second
  digitalWrite(11, LOW);    // turn the LED off by making the voltage LOW
  delay(100);
 
}