12周

1. Arduino Projects Book 的 Project 03 及 Project 04

http://www.youtube.com/watch?v=yeqHtqOKjFo

http://blog.arduino.cc/2013/07/30/arduino-starter-kit-video-tutorials/
http://forum.arduino.cc/index.php?PHPSESSID=2lv70v95kt2ic2lvqcbos9q9n3&board=86.0


http://quarknet.fnal.gov/fnal-uc/quarknet-summer-research/QNET2011/project_files/teacher_files/Getting_Started_with_Arduino.pdf
http://www.slideshare.net/GonzaloSantiago/arduino-26585969


十二月將邀請叁式曾煒傑創辦人來演講哦!
http://www.thefwa.com/site/heineken-pioneering-bar
http://www.ultracombos.com/blog/archives/2041
http://www.npm.gov.tw/zh-tw/Article.aspx?sNo=04005119


//程式碼
project3
const int sensorPin =A0;
const float baselineTemp = 20.0;

void setup(){
  Serial.begin(9600);
  for(int pinNumber = 2;pinNumber<5;pinNumber++){
    pinMode(pinNumber,OUTPUT);
    digitalWrite(pinNumber,LOW);
  }
}

void loop(){
  int sensorVal = analogRead(sensorPin);
  Serial.print("Sensor Value: ");
  Serial.print(sensorVal);
  float voltage = (sensorVal/1024.0)*5.0;
  Serial.print(" , Volts");
  Serial.print(voltage);
  Serial.print(" , degree C: ");
  float temperature = (voltage- .5)*100;
  Serial.println(temperature);
if(temperature<baselineTemp)
{
 digitalWrite(2,LOW);
 digitalWrite(3,LOW);
 digitalWrite(4,LOW);
}
else if(temperature>=baselineTemp+2 && temperature<baselineTemp+4)
{
   digitalWrite(2,HIGH);
   digitalWrite(3,LOW);
   digitalWrite(4,LOW);
}
else if(temperature>=baselineTemp+4 && temperature<baselineTemp+6)
{
   digitalWrite(2,HIGH);
   digitalWrite(3,HIGH);
   digitalWrite(4,LOW);
}
else if(temperature>=baselineTemp+6)
{
   digitalWrite(2,HIGH);
   digitalWrite(3,HIGH);
   digitalWrite(4,HIGH);
}
delay(1);
}

project4
const int greenLEDPin = 9;
const int redLEDPin = 11;
const int blueLEDPin = 10;
const int redSensorPin = A0;
const int greenSensorPin = A1;
const int blueSensorPin = A2;
int redValue = 0;
int greenValue = 0;
int blueValue = 0;
int redSensorValue = 0;
int greenSensorValue = 0;
int blueSensorValue = 0;
void setup(){
Serial.begin(9600);

pinMode(greenLEDPin,OUTPUT);
pinMode(redLEDPin,OUTPUT);
pinMode(blueLEDPin,OUTPUT);
}
void loop(){
redSensorValue = analogRead(redSensorPin);
delay(5);
greenSensorValue=analogRead(greenSensorPin);
delay(5);
blueSensorValue=analogRead(blueSensorPin);
Serial.print("Raw Sensor Values \t Red:");
Serial.print(redSensorValue);
Serial.print("\t Green:");
Serial.print(greenSensorValue);
Serial.print("\t Blue:");
Serial.print(blueSensorValue);
redValue=redSensorValue/800*255; ///將範圍值做修改讓顏色變化更明顯
greenValue=greenSensorValue/800*255;
blueValue=blueSensorValue/800*255;
Serial.print("\nMapped Sensor Values \t Red:");
Serial.print(redValue);
Serial.print("\t Green:");
Serial.print(greenValue);
Serial.print("\t Blue:");
Serial.print(blueValue);

analogWrite(redLEDPin,redValue);
analogWrite(greenLEDPin,greenValue);
analogWrite(blueLEDPin,blueValue);
}